(VIDEO) How to use TV Video Demonstration Cart Unit?




Step-by-step instruction:




1. Wheel the cart to the desired location 


2. Unhook the camera and set up the camera/tripod in the location you want


3. Ensure that the camera is powered on


4. The power indication LED on the camera unit is illuminated. (White for standby and Green for fully powered-up)


5. Press On and DOC CAM to display the image on the TV


6. If recording, plug in your USB recording stick to camera to the back of the camera. The onscreen will state a USB stick was plugged in. Use Record buttons on remote if recording. When done recording press STOP and allow 3 seconds of time before removing USB stick to ensure all data is done transferring. (*When recording with a USB stick that is plugged in, the recording will automatically record to the USB stick, ready to view later)






7. Aim the camera to the location needed. Having the red laser as your guide, as to where the camera is pointing. Note you will not see the red laser in your image. 



NOTE: Please do not stare directly into the laser beam. This is hazardous for your eyes! 









Creative Commons License

This work by Kwantlen Polytechnic University (KPU) is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.