This is the final step before you are ready to begin recording. This presumes you have done the necessary setup required and your hair is done properly, and you are ready to go live.


This black box beside the dashboard is the USB recorder device that records all your videos into your USB flash drive. 

Follow the instructions below or on the device to ensure you have a smooth recording.

  1. Insert your USB Flash Drive (4GB+ recommended) into the arrow.
  2. The RED REC BUTTON should start pulsing (~5sec). This is an indication your USB flash drive is inserted correctly. 
  3. To begin recording, press on the RED REC BUTTON. (DO NOT HOLD the button, this will reset the recording device.) The RED REC BUTTON should turn to a solid blue light. That is indication that your recording has begun. Proceed to record your content.
  4. To stop recording, press on the RED REC BUTTON again. The solid blue light should begin pulsing again. (DO NOT REMOVE your USB drive immediately, wait a few seconds or longer if it's a long recording before removing your USB flash drive). 
  5. That's it! You're done. Review your recording with the in room PC computer.





Creative Commons License

This work by Kwantlen Polytechnic University (KPU) is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.